SuperServer 1029P-NR32R User's Manual
102
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Disabled and
Enabled
.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are
No
; Yes, On next reset;
Yes, On every reset.
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event log
is full. The options are
Do Nothing
and Erase Immediately.
Custom EFI Logging Options
Log EFI Status Codes
This feature allows the user to determine whether the BIOS will log EFI Status Cods, error
code only, progress code only, or both. The optioins are Disabled, Both,
Error code
, and
Progress code
Note
: After making changes on a setting, be sure to reboot the system for the changes
to take effect.
BMC Network Configuration
Configure IPV4 support
IPMI_LAN Selection
This item displays the IPMI_LAN setting. The default setting is
Failover
.
IPMI Network Link Status
This item displays the IPMI Network Link status. The default setting is
Dedicated LAN
.
