Supermicro Supero SUPERSERVER 2027PR-DC0FR, User Manual

Page: 71 / 144

Chapter 5: Advanced Serverboard Setup
5-17
LAN1 (Ethernet Ports)
A LAN (Ethernet) Port 1 is located
at JLAN1 on the I/O backplane
o n t h e m o t h e r b o a r d . T h i s L A N
port supports Gigabit_LAN on the
X9DRT-P/X9DRT-PIBF serverboards,
a n d s u p p o r t s 1 0 G _ L A N o n t h e
X9DRT-PT serverboard. Additionally,
there is a dedicated LAN for IPMI on
top of the two rear USB ports. These
Ethernet ports accept RJ45 type
cables
Note : Please refer to the LED Indicator
Section for LAN LED information.
LAN Ports (LAN1)
Pin Defi nitions
Pin# Defi nition Pin# Defi nition
1 P2V5SB 10 SGND
2 TD0+ 11 Act LED
3 TD0- 12 P3V3SB
4 TD1+ 13 Link 100 LED
(Yellow, +3V3SB)
5 TD1- 14 Link 1000 LED
(Yellow, +3V3SB)
6 TD2+ 15 Ground
7 TD2- 16 Ground
8 TD3+ 17 Ground
9 TD3- 18 Ground
Note: NC indicates no connection.
Unit Identifi er Switches
A Unit Identifi er (UID) switch is located
at UIDSW2 on the I/O panel, and
a UID LED indicator is located at
UIDLED1 on the motherboard. When
the user presses the UID switch, the
UID LED indicator will be turned on.
Press the UID switch again to turn
off the LED indicator. The UID LED
Indicator provides easy identifi cation
of a system unit that may be in need
of service. See the table on the right
for pin defi nitions.
UID Switch
(UIDSW2)
Pin Defi nitions
Pin# Defi nition
1 Ground
2 Ground
3 Button In
4 Ground
UID Switches & LEDs
(UIDLED1)
Description Location
Rear Switch UIDSW2
Rear UID LED UIDLED1
Video Connector
A Video (VGA) connector is located
next to Fan 4 on the IO backplane. This
connector is used to provide video and
CRT display. Refer to the board layout
below for the location.