background image

2-3

SC842 Chassis Manual

• 

Please handle used batteries carefully. Do not damage the battery in any way; 
a damaged battery may release hazardous materials into the environment. Do 

not  discard  a  used  battery  in  the  garbage  or  a  public  landfill.  Please  comply 

with the regulations set up by your local hazardous waste management agency 
to dispose of your used battery properly.

• 

DVD-ROM laser: CAUTION - This server may have come equipped with an 
optional DVD-ROM drive. To prevent direct exposure to the laser beam and 
hazardous radiation exposure, do not open the enclosure or use the unit in any 
unconventional way.

2-5  General Safety Precautions

• 

Keep the area around the chassis clean and free of clutter.

• 

Place the chassis top cover and any system components that have been re-
moved away from the system or on a table so that they won’t accidentally be 
stepped on.

• 

While working on the system, do not wear loose clothing such as neckties and 
unbuttoned shirt sleeves, which can come into contact with electrical circuits or 
be pulled into a cooling fan.

• 

Remove any jewelry or metal objects from your body, which are excellent metal 
conductors that can create short circuits and harm you if they come into contact 
with printed circuit boards or areas where power is present.

• 

After accessing the inside of the system, close the system back up and secure 
it to the rack unit with the retention screws after ensuring that all connections 
have been made.

2-6  System Safety

Electrostatic discharge (ESD) is generated by two objects with different electrical 
charges coming into contact with each other. An electrical discharge is created to 
neutralize this difference, which can damage electronic components and printed 

circuit  boards.  The  following  measures  are  generally  sufficient  to  neutralize  this 

difference before contact is made to protect your equipment from ESD:

• 

Do not use mats designed to decrease electrostatic discharge as protection from 

electrical shock. Instead, use rubber mats that have been specifically designed 

as electrical insulators.

Summary of Contents for Supero SC842i-500B





























































Reviews: