Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 309 / 404

7-181
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Interfaces
Clicking the I
NTERFACES
tab brings up the PIM I
NTERFACE
C
ONFIGURATION
page
( Figure 7-161 ). The parameters for this page are shown in Table 7-129 .
BSR Address
This parameter specifies the IP address of the bootstrap router for the local
PIM region, which is a read-only field.
BSR Expiry Time
This parameter indicates the minimum time remaining before the bootstrap
router in the local domain is declared down, which is a read-only field.
Figure 7-161. PIM Interface Configuration Page
Table 7-129. PIM Interface Configuration Page Parameters
Parameter Description
Interface This parameter specifies the interface index.
Component ID This parameter specifies a number uniquely identifying the component.
Hello Interval (Seconds)
This parameter specifies the time interval between two successive Hello
messages being sent by PIM on this interface.
Join Prune Interval
(Seconds) This parameter specifies the time interval between two successive Join/
Prune messages being sent by PIM on this interface.
Table 7-128. PIM Component Configuration Page Parameters (Continued)
Parameter Description