Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 279 / 404

7-151
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Clicking the L
OCAL
P
REF
tab brings up the BGP L
OCAL
P
REFERENCE
C
ONFIGURATION
page ( Figure 7-132 ), which allows you to configure the Local Preference value for
routes. The parameters for this page are shown in Table 7-105 .
Table 7-105. BGP Local Preference Configuration Page Parameters
Parameter Description
Local Preference ID
This parameter specifies the Local Preference ID, which is the index for
this table.
Remote AS
This parameter specifies the AS number from which the route update is
received.
IP Address Prefix
This parameter specifies the IP Address prefix for which the update is
received.
IP Address Prefix Length This parameter is used to calculate the subnet.
Intermediate AS This parameter represents the intermediate AS between the BGP peers.
Direction
This parameter can be set for the incoming or the outgoing packets using
In and Out values.
Value
This parameter specifies the Local preference value to be associated with
this learnt path.
Preference This parameter is used to enable/disable filtering.
Status This parameter specifies the status of the entry.