Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 225 / 404

7-97
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Port Channel
Clicking the P
ORT
C
HANNEL
S
ETTINGS
tab brings up the LA P
ORT
C
HANNEL
S
ETTINGS
page ( Figure 7-84 ), which is used to edit the Port Channel configuration. The first table
is for creating Port Channel interfaces while the second table is for editing the Port
Channel configuration. The third table is used to display the Port Channels and to delete
the existing Port Channels.
The parameters for this page are shown in Table 7-61 .
Figure 7-84. LA Port Channel Settings Page
Table 7-61. LA Port Channel Settings Page Parameters
Parameter Description
Port Channel ID This parameter specifies the identifier of the port channel interface.
Action Type
This parameter specifies whether the port channel must be created or
deleted.
Ports
This parameter specifies the interface indices that must be configured to
be members of the Port Channel.
MAC Selection
This parameter specifies the mode by which the MAC address for the port
channel is assigned. It can be dynamic or the user can
Force the selection
of a specific MAC address.
Force MAC
This parameter specifies the MAC Address that is assigned to the port
channel. For this, the MAC selection mode must be
Force .