Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 224 / 404

Superblade Network Modules User’s Manual
7-96
Interface Settings
Clicking the I
NTERFACE
S
ETTINGS
tab brings up the P
ORT
C
HANNEL
I
NTERFACE
B
ASIC
S
ETTINGS
page ( Figure 7-83 ), which allows you to configure port channels. The
parameters for this page are shown in Table 7-60 .
System Priority
This parameter specifies the priority value associated with the Actor's
system ID.
System ID
This parameter specifies the Bridge MAC Address that is displayed. This is
a read-only parameter.
Figure 7-83. Port Channel Interface Basic Settings Page
Table 7-60. Port Channel Interface Basic Settings Page Parameters
Parameter Description
Port Channel ID
This parameter specifies the identifier of the port channel interface. The
valids values are between
1 to 65535 .
Admin Status This parameter administratively makes the port channel Up or Down .
MTU This parameter specifies the MTU value for this port channel.
Table 7-59. LA Basic Settings Page Parameters (Continued)
Parameter Description