Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 219 / 404

7-91
Chapter 7: Layer 2/3 Ethernet Switch Firmware
VLAN Mapping
Clicking the VLAN M
APPING
tab brings up the VLAN M
APPING
page ( Figure 7-79 ), whose
table contains one entry for each instance of MSTP. The parameters for this page are
shown in
Table 7-56 .
Auto Edge Status If set to True , the edge port status will be dynamically calculated.
Restricted Role This parameter specifies the Restricted role status of the port.
Restricted TCN This parameter indicates the Restricted TCN status of the port.
Figure 7-79. VLAN Mapping Page
Table 7-56. VLAN Mapping Page Parameters
Parameter Description
MSTP Instance ID This parameter specifies the Instance ID, which is the index of the table.
Map VLAN
This parameter specifies the list of VLANs to be mapped to this instance of
the spanning tree.
Unmap VLAN
This parameter specifies the list of VLANs to be unmapped from this
instance of the spanning tree.
Table 7-55. CIST Settings Page Parameters (Continued)
Parameter Description