Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 211 / 404

7-83
Chapter 7: Layer 2/3 Ethernet Switch Firmware
RSTP
The RSTP link provides links to the following configuration pages:
• "RSTP Global Settings" on page 7-83
• "RSTP Basic Settings" on page 7-84
• "Port Settings" on page 7-85
• "Port Status" on page 7-86
RSTP Global Settings
Clicking the G
LOBAL
S
ETTINGS
tab brings up the G
LOBAL
C
ONFIGURATION
page
( Figure 7-72 ), which allows you to configure RSTP global parameters. The parameters
for this page are shown in Table 7-50 .
Figure 7-72. Global Configuration Page
Table 7-50. Global Configuration Page Parameters
Parameter Description
System Control This parameter starts or Shutsdown RSTP in the switch.
Status
This parameter allows you to enable/disable the protocol at a global level
on the switch.
Dynamic Path Cost
Calculation This parameter allows you to enable or disable the D
YNAMIC
P
ATH
C
OST
C
ALCULATION
.