Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 169 / 404

7-41
Chapter 7: Layer 2/3 Ethernet Switch Firmware
SNMP AgentX
Clicking the A
GENT
X link brings up the SNMP A
GENT
X S
UBAGENT
S
ETTINGS
page
( Figure 7-35 ), which allows you to configure SNMP Agentx sub-agent parameters. The
parameters for this page are shown in Table 7-24 .
Table 7-23. SNMP Trap Settings Page Parameters
Parameter Description
Notify Name N
OTIFY
N
AME
is a unique identifier associated with the entry.
Notify Tag
N
OTIFY
T
AG
contains a single tag value, which is used to select entries in
the Target Address table. Any entry in the Target Address table that
contains a tag value equal to the value of an instance of this Trap Manager,
is selected.
Notify Type
The type of notification of the SNMP Trap Settings can be configured as
Trap or Inform .
Storage Type S
TORAGE
T
YPE
can be configured as Volatile or Non-Volatile .
Figure 7-35. SNMP AgentX Subagent Settings Page
Table 7-24. SNMP AgentX Subagent Settings Page Parameters
Parameter Description
Transport Domain This parameter allows you to specify the TCP.
IP Address Type This parameter specifies IPv4 or IPv6 for the IP A
DDRESS
T
YPE
.