Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 165 / 404

7-37
Chapter 7: Layer 2/3 Ethernet Switch Firmware
SNMP Target Address Settings
Clicking the T
ARGET
A
DDRESS
tab brings up the SNMP T
ARGET
A
DDRESS
S
ETTINGS
page
( Figure 7-31 ), which configures SNMP target address parameters. The parameters for
this page are shown in Table 7-20 .
Table 7-19. SNMP View Tree Settings Page Parameters
Parameter Description
View Name This parameter specifies a V
IEW
N
AME
string.
SubTree This parameter specifies a tree OID.
Mask This parameter specifies an OID mask.
View Type This parameter specifies whether a V
IEW
T
YPE
is Included or Excluded .
Storage Type
Use this parameter to specify whether the S
TORAGE
T
YPE
is volatile or
non-volatile .
Figure 7-31. SNMP Target Address Settings Page
Table 7-20. SNMP Target Address Settings Page Parameters
Parameter Description
Target Name This parameter specifies a T
ARGET
N
AME
as a unique identifier.
Target IP Address
The T
ARGET
IP A
DDRESS
specifies a target address to be used in the
generation of SNMP operations.