Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 146 / 404

Superblade Network Modules User’s Manual
7-18
Radius
Clicking the R
ADIUS
tab brings up the R
ADIUS
S
ERVER
C
ONFIGURATION
page
( Figure 7-14 ). This page allows you to configure the RADIUS server parameters as
shown in Table 7-4 .
Figure 7-14. Radius Server Configuration Page
Table 7-4. Radius Server Configuration Page Parameters
Parameter Description
Server ID This parameter specifies the unique identifier of the Radius Server Entry.
IP Address This parameter specifies the IP Address of the Radius Server.
Shared Secret
Use this parameter to specify the secret string, which is to be shared
between the Radius Server and the Radius Client.
Server Type
This parameter specifies the following RADIUS server type
• Authentication
• Accounting
• Both ( Authentication and Accounting ).
Response Time (secs)
This parameter specifies the maximum time that the Radius Server has to
respond for a request from the Radius Client.
Retry Count
This parameter specifies the maximum number of times a radius request is
re-transmitted before getting a response from the Radius Server.