15
Chapter 2 Installation and Setup
Figure 2-1. Installing the a Blade into the Enclosure
2.2 Installing or Accessing the Blade Unit
Installing a Blade Unit into the Enclosure
Make sure the cover of the blade unit is on before insertion.
Installing a Blade Unit into the Enclosure
1. Pull open the blade locking handle and slowly push the blade into its bay as pictured
below.
2.
When the blade stops, push the handle into its locked position, making sure the notch in
the handle catches the lip of the enclosure.
Caution
: Insert the blade carefully to avoid damaging the connectors in the enclosure bay.
Removing a Blade Unit from the Enclosure
A blade can be removed from the enclosure while other blades continue to operate.
Removing a Blade Unit from the Enclosure
1. Power down the blade unit.
2.
Lift the handle completely and use it to pull the blade unit from the enclosure.
