2-3
Chapter 2: Installation
Unpacking
The system board is shipped in anti-static packaging to avoid static
damage. When unpacking the board, be sure the person handling
the board is static-protected.
2-3 Configuring System Board Jumpers
Use the following settings to configure your system board. Refer to
Figure 1-1 for an illustration of the jumpers. Manufacturing jumpers
are permanently fixed or preset in place on the system board. You
cannot move them. These jumpers are labeled on the system
board and are listed below as Manufacturer Settings.
Manufacturer Settings
J86:
1-2
J88:
1-2
J827:
ON
J828
ON
J829:
ON
JP13:
2-3
JP15:
2-3
JP26:
OFF
JP27:
ON
JP38:
OFF
JP88:
OFF
JP917
ON
JP924
1-2
JP925
1-2
JP880:
1-2
Default
2-3
CMOS Clear
JP42:
ON (ISA CLK=PCI CLK/4)
OFF (ISA CLK=PCI CLK/3)
