Supermicro SSE-G2252, User Manual

Page: 729 / 1401

Chapter 21: SNMP Commands
– 738 –
Row Status: active
Console#
Notification Log Commands
nlm
This command enables or disables the specified notification log.
S
YNTAX
[ no ] nlm filter-name
filter-name - Notification log name. (Range: 1-32 characters)
D
EFAULT
S
ETTING
Enabled
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
•
Notification logging is enabled by default, but will not start recording
information until a logging profile specified by the snmp-server
notify-filter command is enabled by the nlm command.
•
Disabling logging with this command does not delete the entries stored
in the notification log.
E
XAMPLE
This example enables the notification log A1.
Console(config)#nlm A1
Console(config)#
snmp-server
notify-filter
This command creates an SNMP notification log. Use the no form to
remove this log.
S
YNTAX
[ no ] snmp-server notify-filter profile-name remote ip-address
Table 21-5: show snmp view - display description
Field Description
View Name Name of an SNMP view.
Subtree OID A branch in the MIB tree.
View Type Indicates if the view is included or excluded.
Storage Type The storage type for this entry.
Row Status The row status of this entry.