Supermicro SSE-G2252, User Manual, Page: 1309 / 1401

Chapter 43: Domain Name Service Commands
– 1324 –
R
ELATED
C
OMMANDS
ip domain-list (1321)
ip name-server (1324)
ip domain-lookup (1322)
ip host
This command creates a static entry in the DNS table that maps a host
name to an IPv4 address. Use the no form to remove an entry.
S
YNTAX
[ no ] ip host name address
name - Name of an IPv4 host. (Range: 1-100 characters)
address - Corresponding IPv4 address.
D
EFAULT
S
ETTING
No static entries
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
Use the no ip host command to clear static entries, or the clear host
command to clear dynamic entries.
E
XAMPLE
This example maps an IPv4 address to a host name.
Console(config)#ip host rd5 192.168.1.55
Console(config)#end
Console#show hosts
No. Flag Type IP Address TTL Domain
---- ---- ------- -------------------- ----- ------------------------------
0 2 Address 192.168.1.55 rd5
Console#
ip name-server
This command specifies the address of one or more domain name servers
to use for name-to-address resolution. Use the no form to remove a name
server from this list.
S
YNTAX
[ no ] ip name-server server-address1 [ server-address2 …
server-address6 ]
server-address1 - IPv4 or IPv6 address of domain-name server.
server-address2 … server-address6 - IPv4 or IPv6 address of
additional domain-name servers.
D
EFAULT
S
ETTING
None