10
SCE102 Chassis User's Manual
1.4 Chassis Installation and Setup
The chassis is shipped without any components pre installed. The motherboard is optional
and shipped separately. Several steps are necessary to begin using your chassis. Aside from
the motherboard and CPU, you must add memory, mount the hard disk drive, and mount the
system in place.
Unpacking the System
Inspect the box in which the chassis was shipped and note if it was damaged. If the chassis
itself shows damage, file a damage claim with the carrier.
Warnings and Precautions
•
Use a stable regulated power source to protect the chassis from power surges, voltage
spikes.
•
Review the electrical and general safety precautions in Appendix A.
Adding Components to your System
•
Memory
: Please refer to the instructions that came with your motherboard.
•
Drives and Storage
: To add storage capabilities to your chassis, see Chapter 2. Refer to
the instructions that came with your motherboard for connection procedures.
•
Input/Output:
Please refer to the instructions that came with your motherboard.
•
Software
: Please refer to the instructions that came with your software.
