Supermicro SC504-203B, User Manual

Page: 39 / 60

5-3
Chapter 5: Chassis Setup and Maintenance
5-3 Installing the Hard Drives
Installing 3.5" Hard Drives
3.5" hard drives may be installed in several different configurations. Review the
supported configuration options on page 5-5 of this manual.
Installing 3.5" Hard Drives
1. Power down the server, disconnect the power cord from the power supply and
remove the cover.
2. Place the up to two 3.5" hard drives into the chassis, as illustrated in figure
5-3 and 5-5.
3. Secure the hard drives to the chassis floor by inserting four screws up
through the underside of the chassis.
4. Connect the hard drive wiring, reinstall the chassis cover and power cord and
then power up the server.