Supermicro SBI-7427R-S3, User Manual, Page: 10 / 86

SBI-7427R-S3 Blade Module User’s Manual
1-2
1-3 Blade Module Features
Table 1-1 lists the main features of the SBI-7427R-S3 blade module. See the
proceeding section for components typically included in a blade system and other
optional components. Specific details for the SBI-7427R-S3 blade module are found in
Chapter 4: "Blade Module Features" on page 4-1 .
Processors
The SBI-7427R-S3 blade module supports dual 2011-pin (LGA 2011 Socket R) Intel
Xeon E5-2600 series processors.
Refer to the Supermicro web site for a complete listing of supported processors ( http://
www.supermicro.com/products/superblade ). Please note that you will need to check the
detailed specifications of a particular blade module for a list of the CPUs it supports.
Details on installation of the processor into the SBI-7427R-S3 blade module are found in
Chapter 3: "Setup and Installation" on page 3-1 .
Memory
Both the SBI-7427R-S3 blade module have sixteen (16) 240-pin DIMM sockets that can
support up to 256 GB RDIMM or 64 GB UDIMM of Very Low Profile (VLP) DDR3 1600/
1333/1066 MHz speed SDRAM. Memory is interleaved, which requires modules of the
same size and speed to be installed in groups (of two or three).
Please refer to the Supermicro web site for a list of supported memory
(
www.supermicro.com/products/superblade ). The detailed specifications for a blade
module will contain a link to a list of recommended memory sizes and manufacturers.
Details on installation of memory modules into the SBI-7427R-S3 blade module are
found in
Chapter 3: "Setup and Installation" on page 3-1 .
Table 1-1. SBI-7427R-S3 Blade Module Specification Features
Mainboard
B9DR7 (proprietary form factor)
Chassis Dimensions (HxWxD): 11.32” x 1.19” x 18.9”
Processors
Dual or quad core Intel
™
Xeon
®
E5-2600 series 2011-pin processors.
Please refer to our web site for a complete listing of supported processors.
FSB Speed QPI up to 8 GT/s
Chipset Intel C602J
Graphics Controller Integrated Matrox G200 Graphics
BIOS 16 MB SPI Flash EEPROM with AMI® BIOS
Memory Capacity
Supports up to 256 GB of RDIMM and 64 GB of UDIMM VLP DDR3 1600/
1333/1066 MHz speed SDRAM in sixteen (16) 240-pin DIMM sockets
HDD Controller Intel C602J on-chip controller for three Serial ATA drives
Hard Drive Bays Includes three hot-swap drive bays for 2.5" SAS/SATA/SSD disk drives