Supermicro SBI-7126TG, User Manual, Page: 58 / 70

SBI-7126TG Blade Module User’s Manual
5-16
5-8 Exit
Choose E
XIT
from the AMI BIOS Setup Utility main menu with the arrow keys to display
the E
XIT
S
ETUP
menu. All Exit BIOS settings are described in Table 5-16 below.
Table 5-15. Boot Setup Menu Options
Menu Option Description

Boot Device Priority
This sub-menu feature allows you to specify the sequence of priority for the boot
device (such as hard disk drives, USB devices, CD-ROM drives, Network drives
and so on). The menu options are for 1st Boot Device, 2nd Boot Device and 3rd
Boot device, 4th Boot Device and 5th Boot Device. Each numbered boot device
can be set to a specific device installed in your system or to Disabled.
NOTE: A device enclosed in parenthesis has been disabled in the corresponding
type menu.

Hard Disk Drives
This sub-menu feature allows you to specify the boot sequence from all available
hard disk drives installed on your system. The settings for each are list of all
available hard disk drives in your system that have been detected or Disabled.

Network Drives
This sub-menu feature allows you to specify the boot sequence from all available
Network drives installed on your system. The settings for each are list of all
available Network drives in your system that have been detected or Disabled.
Retry Boot Devices
This setting, when enabled, will retry reading boot devices when there is an error
in booting. Options are Enabled or
Disabled .
Table 5-16. Exit Menu Options
Menu Option Description
Save Changes and
Exit
Highlight this item and hit <E
NTER
> to save any changes you made and to exit
the BIOS Setup utility. The system will reboot and implement the changes you
have made to the BIOS Setup.
Discard Changes and
Exit
Highlight this item and hit <E
NTER
> to exit the BIOS Setup utility without saving
any changes you may have made. Any changes you have made to the BIOS
Setup will not take effect upon system bootup.
Discard Changes
Highlight this item and hit <E
NTER
> to discard (cancel) any changes you made.
You will remain in the Setup utility.
Load Optimal
Defaults
Highlight this item and hit <E
NTER
> to load the default settings for all items in the
BIOS Setup. These are the safest settings to use and are designed for maximum
system performance, but may not work best for all computer applications.
Load Fail Safe
Defaults Highlight this item and hit <E
NTER
> to load fail-safe settings that are designed for
maximum system stability, but not for maximum performance.