Supermicro SBI-6129P-C3N, User Manual

Page: 57 / 101

4-1
Chapter 4: Blade Module Features
Chapter 4
Blade Module Features
Figure 4-1. SBI-6129P-C3N Blade Unit Front View
This chapter describes the SBI-6129P-C3N blade unit. Installation and maintenance
should be performed by experienced technicians only.
See Figure 4-1 for a front view of the blade unit and Table 4-1 for its features.
Table 4-1. SBI-6129P-C3N Blade Unit Features
Feature Description
Processors
Supports two Intel Xeon Scalable Socket P LGA 3647 Intel Xeon processor EP
series processors per node
Memory
Supports up to 3 TB of RDIMM/LRDIMM DDR4 2666/2400 MHz speed, 8 GB, 16
GB, 32 GB, 64 GB and 128 GB size SDRAM memory in twenty-four (24) 288-pin
DIMM sockets per node. See
https://www.supermicro.com/support/resources/
memory/X11_memory_config_guide.pdf for details.
Storage
Includes two hot-swap 2.5" NVMe disk drives plus one hot-swap 2.5" SAS3/
SATA3 drive or three 2.5" SAS3/SATA3 drives
Ports One TPM header, Intel X722 dual port 10-Gigabit Ethernet
Features
Onboard Integrated Aspeed AST2500 VGA Graphics chip, Intel® I/OAT 3,
VMDq, IPMI 2.0, ATA/100, Plug and Play, APM 1.2, DMI 2.3, PCI 2.2, ACPI 1.0/
2.0, SMBIOS 2.3, Real Time Clock, Watch Dog,