Supermicro PDSBA, User Manual

Page: 72 / 86

4-18
PDSBA-Q+/PDSBA+/PDSBA/PDSBE User's Manual
Hardware Monitoring
CPU Overheat Temperature
This option allows the user to set a CPU temperature overheat threshold that will
activate the alarm system when the CPU temperature reaches this pre-set tempera-
ture threshold. The options are 70 o C, 75 o C, 80 o C and 85 o C. (See the note below.)
Highlight this and hit <Enter> to see the status of each of the following items:
CPU Temperature/System Temperature
If the feature of Auto Fan Control is enabled, the BIOS will automatically display
the status of the fan as specifi ed.
Fan Speed Control
Set to Enabled to enable Fan Speed Control. If set to Disabled, the function of Fan
Speed Control will be turned off, and the fan will be running at the full speed of 12V
at all time. The options are Enabled and Disabled.
Overheat Beep Function
Set to Enabled to activate the alarm when an overheating occurs. If set to Disabled,
the alarm will not be turned on when an overheat occurs. The options are Enabled
and Disabled.
Voltage Monitoring
The following items will be monitored and displayed:
Vcore-CPU/12V Vcc/5V Vcc/3.3V Vcc/-12V Vcc/5V Standby/3V Standby/Vbatt.
Note: In the Windows OS environment, the Supero Doctor III settings take
precedence over the BIOS settings. When fi rst installed, Supero Doctor III
adopts the temperature threshold settings previously set in the BIOS. Any
subsequent changes to these thresholds must be made within Supero Doc-
tor, since the SD III settings override the BIOS settings. For the Windows
OS to adopt the BIOS temperature threshold settings, please change the
SDIII settings to be the same as those set in the BIOS.