To protect the system and components, it is essential that you reinstall the top panel after you have finished working on the system.
Front Panel Functions
1. Hot-plug SCSI hard drive, SCSI ID 0
2. Hot-plug SCSI hard drive, SCSI ID 1
3. 1 slim CD-ROM drive
4. Floppy drive
5. Overheat: Indicates an overheat condition in the system
6. NIC2: Indicates network activity on LAN2 when flashing
7. NIC1: Indicates network activity on LAN1 when flashing
8. HDD: Indicates IDE channel activity
9. Power: Indicates power is being supplied to the system's
power supply units
1
2
4
3
5 6 7 8 9
Rear Panel Functions
1. AC power connector
2. PS/2 mouse and keyboard port
3. 2 USB ports
4. 2 COM ports ( 1 internal)
5. 1 VGA port
6. 2 x Intel 82550 LAN ports
7. 64/32-bit Expansion slot
8. External Ultra160 SCSI connector
9. PCI card release latch
Due to the fact that adequate air flow and
proper thermal control are very critical in
maintaining 1U system stability and
performance, it is imperative that the proper
installation procedures listed on the left be
followed in order to maximize system
performance. This is especially critical for 1U
Dual Processor Servers with CPU speeds of
1 GHz and above.
Warning !
CPU Heatsink Installation Procedures
(For Supermicro SuperServer 1U Systems)
1) Only those CPU heatsinks that are provided by Supermicro should be used.
2) Apply proper amount of silicon compound on the CPU die.
3) Place the CPU heatsink on top of the CPU.
4) Place the heatsink spring on top of the CPU heatsink and lock the backside of the spring into its notch.
5) Lock the front side of the heatsink spring into its notch.
= >
1 2 3 4 5
Cooling Fan Installation
1
2
3 4
5
6
7
8
9
