57
Chapter 2: Installation
2.10 LED Indicators
LAN1/LAN2 LEDs
LAN1 and LAN2 ports are located on the I/O back panel of the
motherboard. Each Ethernet LAN port has two LEDs. The yellow LED
indicates activity, while the other Link LED may be green, amber, or
off to indicate the speed of the connection. Refer to the tables below
for more information.
LAN1 Speed LED (Left)
LED State
LED Color
Definition
Yellow
1000Mbps
Green
100Mbps
Off
10Mbps
LAN2 Speed LED (Left)
LED State
LED Color
Definition
Green
2500Mbps
Yellow
1000Mbps
Off
100/10Mbps
LAN1/LAN2 Activity LED (Right)
LED State
Color
Status
Definition
Yellow
Flashing
Active
IPMI LAN LEDs
The IPMI LAN port is located next to the LAN1 on the I/O back panel. The left LED indicates
the speed of the connection, while the right LED indicates the status of activity. Refer to the
table below for more information. The IPMI LAN port is supported by X12SCA-F only.
IPMI LAN LEDs
LED State
Color Status
Definition
Link (left)
Green: Solid
Amber: Solid
100Mbps
1Gbps
Activity (right)
Amber: Blinking Active
Activity
LED
Link
LED
1. LAN1/2 LEDs
2. IPMI LAN LEDs
IPMI CODE
X12SCA-F
REV:1.01
MAC CODE
MAC CODE
BAR CODE
DESIGNED IN USA
BIOS LICENSE
B3
JD1
JPW2
JBT1
CPU_FAN2
CPU_FAN1
SYS_FAN1
SYS_FAN2
BMC_HB_LED
JSD1
JF1
JTPM1
JPW1
SP1
JPI2C1
JL1
COM1
LED4
CATERR_LED
PWR_LED
JPL1
JPAC1
JPG1
JPL2
JWD1
JPME2
SYS_F
AN3
PCH
BMC
USB3.2Gen2
USB10
USB3.2 Gen2
12V_PUMP_PWR1
HDMI
DP
DIMMA1
DIMMA2
DIMMB1
DIMMB2
VGA
DVI
USB3.2Gen2
USB3.2Gen1
LAN1
USB6/7
LAN2
USB2/3
IPMI_LAN
USB8/9
AUDIO
USB3.2 Gen1
UID
USB4/5
CPU SLOT6 PCI-E 3.0 X16
CPU SLOT4 PCI-E 3.0 X8 (IN X16)
I-SATA0
I-SATA1
I-SATA2
I-SATA3
PCH SLOT2 PCI-E 3.0 X4
JSTBY1
SLOT1 PCI 33MHZ
JLED1
AUDIO FP
USB0/1
PCI-E_M.2-M1
PCI-E_M.2-M2
2
1
