1S 3.5A Brushless ESC manual
Parameter:
Voltage
：
3.0-4.2V
Output current:3.5A( instant maximum current4.0A)
Weight:0.3g
1,Features:
* Safe protection for connecting power, no matter what position the throttle
stick is when the power is turn on, the ESC won’t start the motor instantly;
* Throttle signal lost protection, if signal communication between the
transmitter and receiver is not good or not stable and causes lost control,
the ESC will cut off the power within 2 seconds softly, and if the signal
is found during this period, the output power will recover and the ESC will
continue its normal working state;
* Overheat protection, the ESC will limit its output power when the
temperature reaches 95
℃,i
f the temperature continues to increase, the ESC
will cut off the power slowly, only the temperature is low enough can the
ESC be powered up and return to normal working state;
* Low voltage protection, when the input is less than 3.0V or more than
4.4V,theESC will enter protection mode, this function only workable
when the power is connected;
* Lipo battery protection
，
when the battery voltage is lower than 3.0V, the
ESC will cut off the power slowly, as soon as the voltage is more
than 3.0V, connect the power and it returns to normal working;
* Block protection, if the prop is blocked, the maximum limitation power
output will be 36%;
2
、
Throttle setup
Initial full throttle position is 1850us, the bottom throttle position is
1200us, it can automatically detect the bottom throttle position as soon as
the power is connected, the followings are for throttle setup order, from the
way the full throttle position can be recorded permanently:
1. Push the throttle to full position, connect the power and wait for 4
seconds, it makes a long beep and the maximum throttle range is recorded.
2. Pull the throttle to lowest position
，
wait for 0.5 second, it makes 3
short beeps and the lowest throttle recorded.
3. When it makes several beeps, it indicates the self-test has been done, the
ESC is ready for work.
The detected range of lowest throttle is0.8ms~1.2ms
，
and the detected range
of full throttle is 1.8ms~2.3ms.
3、Diagram of connection：
