36
H12DSG-Q-CPU6 User's Manual
SATA Ports
The H12DSG-Q-CPU6 has four SATA 3.0 ports through the P1-PCIe1A port and HDD
backplane board BPN-NVMe4-228N-S4 with a specific cable.
NVM Express Connections
Four NVM Express ports are located on the serverboard (from CPU2). These ports provide
high-speed, low-latency PCI-E 4.0 x4 connections directly from the CPU to NVMe Solid State
Drives (SSD). This greatly increases SSD data-throughput performance and significantly
reduces PCI-E latency by simplifying driver/software requirements resulted from direct PCI-E
interface from the CPU to the NVMe SSD drives.
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to the header to inform you when the chassis is opened.
Chassis Intrusion
Pin Definitions
Pin#
Definition
1
Intrusion Input+
2
Intrusion Input-
IPMB System Management Bus Header
A System Management Bus header for IPMI 2.0 is located at JIPMB1. Connect the appropriate
cable here to use the IPMB I
2
C connection on your system.
IPMB Header
Pin Definitions
Pin#
Definition
1
Data
2
Ground
3
Clock
4
3.3V Standby