25
Chapter 3: Maintenance and Component Installation
3.2 Accessing a Node
Removing Nodes from the Chassis
Each of the four individual nodes may be removed from the chassis. Note that when a node
is removed from the chassis, the hard drives located in the node will shut-down.
Removing a Node
1. Power down the node with the operating system. If you shut down a node with the
control panel you risk losing data.
2. Grasp the node by the handles on both sides of the front of the node.
3. Press down on the left handle to disengage the latch.
4. While holding down the left handle, carefully pull the node forward and out of the
chassis.
Figure 3-1. Removing a Node from the Chassis
Handle