Supermicro Desktop 5130DQ-IL User Manual Download

Page: 46 / 107

Desktop 5130DQ-IL User's Manual

5.2 System Information

The System Information Panel displays the motherboard configuration.

How To Change the Configuration Data

The configuration data that determines the system parameters may be changed by entering

the AMI BIOS GUI Setup utility. This Setup utility can be accessed by pressing <Del> at the
appropriate time during system boot.

Note

: For the purposes of this manual, options that are printed in

Bold

are default settings.

The following information is included in this section:

•

Motherboard Model Name - C7Q270-CB-ML.

•

BIOS Version - this item displays the BIOS version number.

•

Build Date and Time - displays the BIOS build date and time.

•

CPU - displays the CPU type speed, stepping, etc

•

CPU Fan Data - displays sensor type, temperature and speed.

Summary of Contents for Desktop 5130DQ-IL












































































































Search results

Summary of Contents for Desktop 5130DQ-IL

Reviews:

Related manuals for Desktop 5130DQ-IL

Brands by name

Popular brands

Supermicro Desktop 5130DQ-IL, User Manual

Search results

Summary of Contents for Desktop 5130DQ-IL

Reviews:

Related manuals for Desktop 5130DQ-IL

Brands by name

Popular brands