Super C9X299-PG300F User Manual
94
Storage Option ROM/UEFI Driver
This feature controls the execution of UEFI and Legacy OpROM. The options are Disabled,
UEFI, and
Legacy
.
Serial ATA Port 0~5
Software Preserve
This feature displays the software information for the detected device.
Hot Plug
This feature designates the port specified for hot plugging. When the feature is set to Enabled,
it will allow the user to replace a SATA disk drive without shutting down the system. The
options are
Disabled
and Enabled.
Spin Up Device
When this feature is disabled, all drives will spin up at boot. When the feature is set to Enabled,
it will perform Staggered Spin Up on any drive. The options are
Disabled
and Enabled.
SATA Device Type
Use this feature to identify the type of HDD that is connected to the SATA port. The options
are
Hard Disk Drive
and Solid State Drive.
ACPI Settings
WHEA Support
Enable this feature to support the Windows Hardware Error Architecture (WHEA) platform
and provide a common infrastructure for the system to handle hardware errors within the
Windows OS environment in order to reduce system crashes and enhance system recovery
and health monitoring. The options are Disabled and
Enabled
.
High Precision Event Timer
Enable this feature to activate the High Precision Event Timer (HPET), which produces
periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in
synchronizing multimedia streams, providing smooth playback and reducing the dependency
on other timestamp calculation devices, such as an x86 RDTSC Instruction embedded in the
CPU. The High Precision Event Timer is used to replace the 8254 Programmable Interval
Timer. The options are Disabled and
Enabled
.
Native PCIE Enable
This feature enables Native PCI-E control. The options are Disabled and
Enabled
.
Native ASPM
This feature selects what controls ASPM. The options are Disabled (BIOS controlled), Enabled
(operating system controlled), and
Auto
.
