Chapter 4: UEFI BIOS
113
Subnet mask
This feature displays the sub-network that this computer belongs to. The value of each
three digit number separated by dots should not exceed 255.
Gateway IP Address
This feature displays the Gateway IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 172.31.0.1).
VLAN
This feature displays the virtual LAN settings. The options are
Disabled
and Enabled.
VLAN ID
Use this feature to enter the VLAN ID. The default setting is
0
.
Configure IPV6 support
IPV6 Support
Use this feature to enable IPV6 support for LAN1. The options are Disabled and
Enabled
.
*If the feature above is set to Enabled, the following feature will become available
for configuration:
Configuration Address Source
This feature allows you to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the
system manually in the field. If DHCP is selected, the BIOS will search for a Dynamic Host
Configuration Protocol (DHCP) server in the network that is attached to and request the
next available IP address for this computer. The options are Static and
DHCP
.
*If the feature of the
is set to DHCP, the following
features will be displayed:
Station IPv6 Address
Prefix Length
IPv6 Router1 IP Address
*If the feature of the
is set to Static, the following
features will become available for configuration:
Station IPV6 address
Use this feature to enter the station IPV6 address. Select the feature and enter the address.
Prefix Length
Select a value to change the prefix length.
