Chapter 4: UEFI BIOS
111
4.7 IPMI
BMC Firmware Revision
IPMI STATUS
System Event Log
Note:
After making changes on a setting in this section, reboot the system for the
changes to take effect.
Enabling/Disabling Options
SEL Components
This feature enables or disables all aspects of System Event Logging during boot. The
options are Disabled and
Enabled
.
Erasing Settings
is set to Enabled, the following features will
become available for configuration:
Erase SEL
This feature controls if/when to erase SEL. The options are
No
, Yes, On next reset, and
Yes, and On every reset.
When SEL is Full
This feature controls what happens with a full SEL. The options are
Do Nothing
and Erase
Immediately.
