22
C7C232-CB-ML User's Manual
I-SATA0
I-SATA1
PCHDR1
BUZ1
NGFFB1
DBGH1
TPMH1
CN1
I-SATA5
I-SATA4
I-SATA3
USB2/3 (2.0)
CRF1
WP1
PCH SLOT5 PCI-E 3.0 X1
PCH SLOT6 PCI-E 3.0 X1
CPU SLOT7 PCI-E 3.0 X16
AUDF1
SPK1
CSOPN1
OBR1
USB8/9 (3.0)
CMOS1
GPIO1
GPIO2
COM1
LEDH1
BT1
CN2
FANC1
FANS1
FANS2
DIMMA2
DIMMB1
KB/MOUSE
USB0/1
LAN1
USB4/5/6/7
(3.0)
AUDIO
HS1
C7C232-CB-ML
DIMMA1
DIMMB2
Rev. 1.00
CPU
PCH
USB2F1
USB3F1
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Location of Mounting Holes
Note:
1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screwdriver (1)
Standoffs (8)
Only if Needed
Phillips Screws (8)
Tools Needed
