AOC-SLG3-4E2P Expansion Card User's Guide
2-4
2-4 Front Jumper Location and Settings
Explanation of Jumpers
To modify the operation of the backplane,
jumpers can be used to choose between
optional settings. Jumpers create shorts
between two pins to change the function
of the connector. Pin 1 is identified with
a square solder pad on the printed circuit
board. Note: On two pin jumpers, "Closed"
means the jumper is on and "Open" means
the jumper is off the pins.
Connector
Pins
Jumper
Setting
3 2 1
3 2 1
J1
Figure 2-4. Front Jumpers
Note: Unless explicitly instructed otherwise by the manufacturer, do not move the
jumper from its default location of pins 1-2. Doing so will likely cause the card to
become disabled.
J1 is for manufacturing purposes only and should never be changed unless explicitly
instructed by Supermicro.
