3-2
AOC-SLG3-2H8M2 Expansion Card User's Guide
3-2 Installing Controller Cards
The AOC-SLG3-2H8M2 supports two M.2 SSDs of 42mm, 60mm, 80mm, or 110mm
length. Visit the Supermicro website for a current list of supported M.2 SSDs.
Installing Controller Cards
1. Power down the system and remove the power cord from the rear of the
power supply.
2. Use industry-standard anti-static equipment (such as gloves or a wrist strap)
and follow the precautions on page 3-1 to avoid damage caused by ESD.
3. In the rear of the chassis, remove the screw securing the PCIe slot cover
over the PCIe slot and set it aside for later use.
4. Insert one M.2 SSD into Slot 0 or two M.2 SSDs of the same type, either
NVMe or SATA, into both slots on the controller card as illustrated below.
Figure 3-1. Inserting an M.2 SSD into the Controller Card Slots
Note
: Your add-on card may not look exactly like the one pictured.
Summary of Contents for AOC-SLG3-2H8M2
Page 1: ...User s Guide Revision 1 0a AOC SLG3 2H8M2 ...
Page 9: ...1 2 AOC SLG3 2H8M2 Expansion Card User s Guide Notes ...
Page 29: ...5 2 AOC SLG3 2H8M2 User s Guide 2 On the Main Menu select Controller Management ...
Page 32: ...5 5 Chapter 5 Hybrid Drive Type Change 8 Press F4 to save and exit ...
