Supermicro AOC-SLG3-2E4R User Manual Download Page 14

3-2

AOC-SLG3-2E4R Expansion Card User's Guide

3-2   Before Installation

To install the expansion card properly, follow the steps below.

1.  Power down the system and unplug the power cord.

2. 

Use industry-standard anti-static equipment (such as gloves or wrist strap) 

and follow the precautions on page 3-1 to avoid damage caused by ESD.

3-3   Installing the Expansion Card

Depending upon which motherboard is used and which slot in the motherboard is se-

lected, a riser card may or may not be required to install the AOC-SLG3-2E4R. Refer 

to the chart below to determine the method of installation for your expansion card.

1.  Power down the system, remove the power cords from the rear of the power 

supply and remove the system cover.

2. 

Verify that your expansion card is equipped with the correct length of PCIe 
slot bracket for your system. AOC-SLG3-2E4R expansion cards include a low-
profile PCIe bracket. However, if your system features full-length PCIe slots, 
replace the low-profile bracket with a full-length bracket.

3.  Determine the correct method of installation for your motherboard:

AOC-SLG3-2E4R Installation Methods

MB

Installation Method

X10DRW-i

X10DRW-iT

Install a full height bracket onto the AOC-SLG3-2E4R expansion card.

Install the RSC-R1UW-2E16 riser card into the left slot of the mother

-

board.

Install the AOC-SLG3-2E4R into the bottom slot of the riser card.

Secure the bracket to the chassis with a screw.

X10DRH-CT

X10DRL-CT

Install a bracket onto the AOC-SLG3-2E4R expansion card.

Install the expansion card into slot 6 on the motherboard.

Secure the bracket to the chassis with a screw.

X10DRH

Install a bracket onto the AOC-SLG3-2E4R expansion card.

Install the expansion card into slot 1 or slot 7 on the motherboard. 

Secure the bracket to the chassis with a screw.

X11DPU-Z+

Install a bracket onto the AOC-SLG3-2E4R expansion card.

Install the AOC-2UR68-m2TS riser card into the right slot of the 

motherboard.

Install the AOC-SLG3-2E4R into the appropriate top or bottom slot of 

the riser card.

Secure the bracket to the chassis with a screw.

Summary of Contents for AOC-SLG3-2E4R





















Reviews: