3-2
AOC-SHG3-4M2P Expansion Card User's Guide
3-2 Installing Expansion Cards
The AOC-SHG3-4M2P supports four M.2 SSDs in 42 mm, 60 mm, 80 mm, or 110
mm length. Visit the Supermicro website for a current list of supported M.2 SSDs.
Installing Expansion Cards
1. Power down the system and remove the power cord from the rear of the
power supply.
2. Use industry-standard anti-static equipment (such as gloves or wrist strap)
and follow the precautions on page 3-1 to avoid damage caused by ESD.
3.
For each SSD of 42 mm, 60 mm, or 80 mm length, install the standoff in
the appropriate hole that corresponds with the form factor of the SSD to be
installed. Push the plastic standoff until it snaps into the carrier card.
Inserting an M.2 SSD into an Expansion Card Slot
4. Insert one to four M.2 SSDs into the slots on the expansion card. Then push
them flat against the carrier card and the plastic standoff.
Inserting a Plastic Standoff into a Mounting Hole
