3-10
AOC-MHIBF-m2Q2G/m1Q2G Add-on Card User's Guide
3-7 Installing Drivers (for Mellanox® ConnectX®-3 Pro)
Use the procedures below to install drivers for Linux.
Linux Drivers
Use the following procedures to install drivers on the Linux operating system or refer
to the Mellanox® support website for more driver installation information.
Installing InfiniBand Drivers for the Linux Operating System
1. Download the driver from the Supermicro CDR-NIC LAN driver CD, the Mel-
lanox® support website that contains the latest driver, or go to the Supermicro
site at
https://www.supermicro.com/wftp/Networking_Drivers/Mellanox/
the following directory: Mellanox > Linux.
2. Choose the desired
InfiniBand Linux
driver package file.
3. Install the driver by entering the following commands:
tar xzvf MLNX_OFED–<ver>.tgz
cd OFED–<ver>
./mlnoxfedinstall --wihout-fw-update
This installs the Linux drivers to your system. For more driver installation infor-
mation, please refer to the Mellanox® support website.
Windows Drivers
Use the following procedures to install drivers on the Windows operating system
or refer to the Mellanox® support website for more driver installation information.
Installing InfiniBand Drivers for the Windows Operating System
1. Download the driver from the Supermicro CDR-NIC LAN driver CD, the Mel-
lanox® support website that contains the latest driver, or go to the Supermicro
site at
https://www.supermicro.com/wftp/Networking_Drivers/Mellanox/
the following directory: Mellanox > Windows.
2.
Choose the desired InfiniBand Windows driver package file.
3.
Double-click to run and install the driver package file.
