manualshive.com logo in svg

Supermicro AOC-ATG-b2TM, User Manual, Page: 24 / 25

Share
Download
Supermicro AOC-ATG-b2TM User Manual Download Page 24

3-7

Chapter 3: Installation

3-5   Installing Drivers (for Broadcom

®

 BCM57416)

Use the procedures below to install both drivers and firmware for the AOC-ATG-

b2TM add-on card for both Linux and Windows.

Linux Drivers

Use the following procedures to install drivers on the Linux operating system. 
Download the drivers from 

ftp://ftp.supermicro/Networking_Drivers/

.

Installing 10G Drivers for the Linux Operating System

1. 

Prerequisites: Install the following:

yum  –y  install  libibverbs*  infiniband-diags  perftest 
qperf librdmacm-utils

yum –y install groupinstall “InfiniBand Support”

2.  From the CDR-NIC LAN driver CD or FTP site, go to the following directory: 

Broadcom > 10G > Linux_Driver.

3. 

Download the Linux driver package file netxtreme-bnxt_en-<ver>.tar.gz.

4.  Install the driver by entering the following commands:

tar xzvf nextreme-bnxt_en–<ver>.tar.gz

cd nextreme-bnxt_en–<ver>

make build

make install

5.  You will need to install RoCE library if you want to use RoCE.

6.  From the CDR-NIC LAN driver CD or FTP site, go to the following directory: 

Broadcom > 10G > Linux_RoCE_Lib.

7. 

Download libbnxtre-<ver>.tar.gz.

8.  Install the library by entering the following commands:

tar xvzf libbnxtre-<ver>.tar.gz

cd libbnxtre-<ver>.tar.gz

Summary of Contents for AOC-ATG-b2TM


























Reviews:

No comments