3-3
Chapter 3: Installation
3-3 Installing the Add-on Card AOC-AH25G-m2S2TM
(with 0.5U bracket)
Follow the steps below to install an add-on card into your system. (If the system
is fixed onto a rack, the removal of server top cover is not required. If the system
is not anchored to a fixed structure, it is recommended to remove the system top
cover for ease of installation)
A. Uninstalling an AIOM module
1. Unscrew the blue knob from the system.
2. Pull on the tab and a knob evenly on both sides of the card to disengage
the AIOM module from the motherboard connector, and then gently slide the
AIOM module out.
Remove the AIOM
card from this slot
The AIOM card with
the 0.5U bracket
installed
Screw knob to
engage/disengage
Pull tab to
engage/disengage
Summary of Contents for AOC-AH25G-m2S2TM
Page 1: ...User s Guide Revision 1 0 AOC AH25G m2S2TM...
Page 5: ...v Preface...
