Chapter 2: Hardware Components
2-5
JSDP1
JPL2
JPL1
GF1
Intel® i350-AM4
Intel® i350-AM4
1
1. JPL1
2. JPL2
Explanation of Jumpers
To modify the operation of the add-on card, a jumper can be used to choose between
optional settings. A jumper creates shorts between two pins to change the function
of the connector. Pin 1 is identified with a square solder pad on the printed circuit
board. See the add-on card layout below for the jumper location.
2-4 Jumpers
LAN Port Enable/Disable
Use Jumpers JPL1 and JPL2 to enable or disable LAN ports on the AOC-AG-i8.
On the AOC-AG-i8, these jumpers will enable or disable LAN ports 1, 2, 3, 4, 5, 6,
7 and 8. See the table below for jumper settings. The default setting is
Enabled
.
LAN Port Enable/Disable
Jumper Settings
Jumper setting Definition
Pin 1-2
Enabled
Pin 2-3
Disabled
1
2
