Super A2SAP-H/-E/-L User's Manual
66
USB Configuration
USB3.0 Support
Select Enable for USB 3.0 support. The options are
Enable
and Disable.
XHCI Pre-Boot Driver
Select Enabled to enable XHCI (Extensible Host Controller Interface) support on a pre-boot
drive specified by the user. The options are Enable and
Disable
.
XHCI Hand-Off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The settings are
Enabled
and Disabled.
USB Mass Storage Driver Support
Select Enabled for USB mass storage device support. The options are Disabled and
Enabled
.
SATA Configuration
Chipset SATA
This feature enables or disables the onboard SATA controller supported by the SoC. The
options are
Enable
and Disable.
SATA Mode Selection
Use this feature to select the mode for the installed SATA drives. The default is
AHCI
.
Aggressive LPM (Link Power Management) Support
When this feature is set to Enabled, the SATA AHCI controller manages the power usage of
the SATA link. The controller will put the link in a low power mode during extended periods of
I/O inactivity, and will return the link to an active state when I/O activity resumes. The options
are
Enabled
and Disabled.
SATA Frozen
Use thia feature to enable the HDD Security Frozen Mode. The options are
Disabled
and
Enabled.
I-SATA1
I-SATA1 Hot Plug
This feature designates the SATA port specified for hot plugging. Set this feature to Enabled
for hot-plugging support, which will allow the user to replace a SATA drive without shutting
down the system. The options are
Enabled
and Disabled.