![Supermicro A2SAN-E User Manual Download Page 82](http://html1.mh-extra.com/html/supermicro/a2san-e/a2san-e_user-manual_1403748082.webp)
Super A2SAN-H/-E/-L and X11SAN User's Manual
82
PCIe/PCI/PnP Configuration
PCI Bus Driver Version A5.01.08
PCI Devices Common Settings:
Above 4G Decoding
Select Enabled for 64-bit devices to be decoded above the 4GB address space, if 64bit PCI
decoding is supported by the system. The options are
Disabled
and Enabled.
NVMe Firmware Source
Use this feature to select the NVMe firmware source. The options are V
endor Defined
Firmware
and AMI Native Support.
M.2 B KEY PCIE GEN2 X1 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and
EFI
.
Onboard LAN Option ROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and
EFI
.
*If Onboard LAN Option ROM Type is set to Lagacy, Onboard LAN1/LAN2 Option ROM
will become available for configuration:
Onboard LAN1 Option ROM
Use this feature to select which LAN1 firmware type to be loaded. The options are
Disabled
,
PXE, and iSCSI.
Onboard LAN2 Option ROM
Use this feature to select which LAN2 firmware type to be loaded. The options are
Disabled
,
PXE, and iSCSI.
Onboard Video Option ROM
Use this feature to select which onboard video firmware type to be loaded. The options are
Disabled, Legacy, and
EFI
.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Disabled and
Enabled
.
*If Network Stack is Enabled, the following four features will become available for
configuration: