A+ Server AS -2014TP-HTR User's Manual
28
3.3 Motherboard Components
Processor and Heatsink Installation
Keep the following in mind:
•
For the Processor/Heatsink installation you need to use a T20 screwdriver when opening/
closing the CPU socket.
•
Always connect the power cords last, and always remove it before adding, removing or
changing any hardware components. Make sure that you install the processor into the CPU
socket before you install the CPU heatsink.
•
If you buy a CPU separately, make sure that you use an Supermicro-certified heatsink only.
Make sure to install the motherboard into the chassis before you install the CPU heatsink.
•
When receiving a motherboard without a processor pre-installed, make sure that the plastic
CPU socket cap is in place and none of the socket pins are bent; otherwise, contact your
retailer immediately.
•
Refer to the Supermicro website for updates on CPU support.
