8
A+ Server AS -2114GT-DNR User's Manual
Chapter 1
Introduction
1.1 Overview
This chapter provides an outline of the functions and features of the AS -2114GT-DNR A+
server. It is based on the H12SSG-AN6 motherboard and the CSE-227GTS-R2K63P chassis.
To maintain quality and integrity, this product is sold only as a completely-assembled system
(with min, one CPU, two DIMMs, one GPU installed). Add on Cards (AOCs) are recommended
to be installed by Supermicro due to optimized density of the 2U form factor. Service: OSNBD3
is highly recommended. In addition to the motherboard and chassis, several important parts
that are included with the system are listed below.
Main Parts List
Description
Part Number
Quantity
Passive Heatsink for 1U System
SNK-P0062P
2
8cm System Fans
FAN-0219L4
4
Backplane
BPN-NVMe4-826N-B2B 2
Hot-swap Hard Drive Trays
MCP-220-00167-0B
4
Air Shroud
MCP-310-22702-0B
2
Riser Card (front right side riser with one PCIe x16 slots)
RSC-GF-6G4
2
Riser Card (front left side riser with two PCIe x16 slots)
RSC-GF-66G4
2
Riser Card (rear side riser with two PCIe x16 slots)
RSC-GB-66G4
2
Power Supply
PWS-2K63A-1R
2
Rack Rail Mounting Kit
MCP-290-00144-0N
1
Note:
the following safety models associated with the AS -2114GT-DNR have been
certified as compliant with UL or CSA: 227G-GPU, 227G-20, 227G-26, 227G-R26H12,
227G-R20H12.
1.2 Unpacking the System
Inspect the box the system was shipped in and note if it was damaged in any way. If any
equipment appears damaged, please file a damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise, and
electromagnetic fields are generated. It will also require a grounded AC power outlet nearby.
Be sure to read the precautions and considerations noted in Appendix A.
