14
A+ Server AS -2013S-C0R User's Manual
Quick Reference Table
Jumper
Description
Default Setting
UID SW
Unit ID switch (push-button toggle switch ON/OFF)
Off
JBT1
Clear CMOS
Open (Normal)
JPB1
BMC Enable/Disable
Pins 1-2 (Enabled)
JPG1
VGA Enable/Disable
Pins 1-2 (Enabled)
JPS1
SAS Enable/Disable (H11SSL-C & H11SSL-NC only)
Pins 1-2 (Enabled)
JWD1
Watch Dog control
Pins 1-2 (Reset)
JPL1, JPL2
LAN1, LAN2 Enable/Disable
Pins 1-2 (Enabled)
LED
Description
Status
UID LED
Rear unit ID LED
Solid blue: UID switched to ON, unit identified
LEDM1
BMC heartbeat LED
Green: Blinking (BMC normal), Green: Fast blinking (BMC initializing)
LE1
Power OK LED
Green: System power OK
LE3
M.2 active LED
Green: M.2 PCIe port active
LEDSAS
SAS port active LED
Green: SAS port active
Connector
Description
Battery (BT1)
Onboard CMOS battery
JNCSI1
NCSI header
COM 1
Rear panel COM port #1
FAN 1~5, A, B
System cooling fan headers
IPMI_LAN
Dedicated IPMI LAN port
JF1
Front control panel
JSEN1
Intel sensor header
JSD1, JSD2
SATA DOM power connector
J23
M.2 PCIe Interface
JTPM1
Trusted Platform Module (TPM)/Port 80 connector
I-SATA0~I-SATA7
Internal SATA Ports
L-SAS0~L-SAS7
Internal SAS Ports
JNVME0
Internal NVMe Ports
JNVME1
Internal NVMe Ports
JL1
Chassis intrusion header
JOH1
Chassis overheat header
USB 0/1 (2.0)
Back panel USB 2.0 ports (USB 0/1)
USB 2/3 (2.0)
Internal USB 2.0 header (USB 2/3)
USB 4/5
Back panel USB 3.0 ports (USB 4/5)
USB 6/7
Internal USB 3.0 header (USB 6/7)
USB8
Internal USB 3.0, Type A port (USB 8)
JSTBY1
Stand by power header
