50
A+ Server AS-1113S-WN10RT User Manual
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and LAN port 2 is on pins 9 and 10. Attach the NIC LED cables here to
display network activity. Refer to the table below for pin definitions.
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the table below
for pin definitions.
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a hard drive LED cable
here to display disk activity detected on the motherboard's built-in disk controllers. See the
table below for pin definitions.
UID LED
The UID LED is on pins 7 and 8 of JF1. Connect the front panel UID LED to this header to
indicate when the rear UID switch is turned on. Refer to the below for pin definitions.
Power Fail LED
Pin Definitions (JF1)
Pins
Definition
5
3.3V
6
PWR Supply Fail
UID LED
Pin Definitions (JF1)
Pins
Definition
7
Vcc
8
Ground
LAN1/LAN2 LED
Pin Definitions (JF1)
Pins
Definition
9/11
NIC 2 Activity LED
10/12
NIC 1 Activity LED
HDD LED
Pin Definitions (JF1)
Pins
Definition
13
+5V
14
HDD Active
