Supermicro 7047R-72RF, User Manual, Page: 94 / 104

7-26
S
UPER
S
ERVER 7047R-72RF/7047R-72RFT User's Manual

System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Enabled
and Disabled.
Erasing Settings
Erase SEL
Select 'Yes, On next reset' to erase all system event logs upon next system reboot.
Select 'Yes, On every reset' to erase all system event logs upon each system reboot.
Select No to keep all system event logs after each system reboot. The options are
No , Yes, On next reset, and Yes, On every reset.
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when the
system event log is full. The options are Do Nothing and Erase Immediately.
Log EFI Status Codes
S e l e c t E n a b l e d t o l o g E F I ( E x t e n s i b l e F i r m w a r e I n t e r f a c e ) S t a t u s
Codes, Error Codes or Progress Codes. The options are Disabled and
Enabled .
Note : After making changes on a setting, be sure to reboot the system for
the changes to take effect.

BMC Network Confi guration
LAN Channel 1: This feature allows the user to confi gure the settings for LAN
Channel 1.
Update IPMI LAN Confi guration
This feature allows the user to decide if the BIOS should confi gure the IPMI setting
at next system boot. The options are No and Yes. If the option is set to Yes, the
user is allowed to confi gure the IPMI settings at next system boot:
Confi guration Address Source
This feature allows the user to select the source of the IP address for this computer.
If Static is selected, you will need to know the IP address of this computer and
enter it to the system manually in the fi eld below. The options are Static and DHCP .