Supermicro 7044H-T, User Manual

Page: 28 / 118

3-2
S
UPER
S
ERVER 7044H-T/7044H-TR User's Manual
3-3 Control Panel LEDs
The control panel located on the front of the SC743T-650/SC743T-R760 chassis
has six LEDs that provide you with critical information related to different parts of
the system. This section explains what each LED indicates when illuminated and
any corrective action you may need to take.
Power: Indicates power is being supplied to the system's power supply. This
LED should normally be on when the system is operating.
HDD: Indicates IDE channel activity. On the SC743T-650, this LED indicates
SATA drive activity when fl ashing.
NIC1: Indicates network activity on LAN1 when fl ashing.
NIC2: Indicates network activity on LAN2 when fl ashing.
Overheat/Fan Fail: When this LED fl ashes, it indicates a fan failure. When
on continuously it indicates an overheat condition, which may be caused by cables
obstructing the airfl ow in the system or the ambient room temperature being too
warm. Check the routing of the cables and make sure all fans are present and
operating normally. You should also check to make sure that the chassis covers
are installed. Finally, verify that the heatsinks are installed properly (see Chapter
5). This LED will remain fl ashing or on as long as the indicated condition exists.
1
2