Supermicro 7043P-8R, User Manual

Page: 22 / 108

2-6
S
UPER
S
ERVER 7043P-8R Manual
Figure 2-5. Installing the Server into a Rack
Installing the Server into the Rack:
You should now have rails attached to both the chassis and the rack unit.
The next step is to install the server into the rack. You should have two
brackets in the rack mount kit. Install these first keeping in mind that they
are left/right specific (marked with "L" and "R"). Then, line up the rear of
the chassis rails with the front of the rack rails. Slide the chassis rails into
the rack rails, keeping the pressure even on both sides (you may have to
depress the locking tabs when inserting).
When the server has been pushed completely into the rack, you should
hear the locking tabs "click". Finish by inserting and tightening the thumb-
screws that hold the front of the server to the rack (see Figure 2-5).