Chapter 5: BIOS
45
Chapter 5
BIOS
5.1 Introduction
This chapter describes the AMI BIOS setup utility for the C7B250-CB-ML and provides the
instructions on navigating the setup screens. The BIOS is stored in a Flash EEPROM and
can be updated.
Note:
Due to periodic changes to the BIOS, some settings may have been added or deleted
since this manual was published. For AMI BIOS Recovery, please refer to the UEFI BIOS
Recovery Instructions in Appendix D.
Starting BIOS Setup Utility
To enter the AMI BIOS setup utility, press the <Delete> key while the system is booting up.
Each BIOS menu option is described in this manual. The Main BIOS Setup screen has two
main areas. The left area is for navigation, and the main area is the information section.
The AMI BIOS GUI Setup Utility uses a mouse pointer navigation system similar to standard
graphical user interfaces. Hover over and click an icon to select a section, click a down arrow
to select from an options list. Icons that do not respond when the mouse pointer is hovering
over them are not configurable.
You may press the <F1> on any screen under the Setup Section to see a list of Hot Keys
that are available. Press <F12> to print the screen.
The keyboard's Escape key <ESC> cancels the current screen and will you back to the
previous screen.
